GB/T 511 Hydraulic Oil Mechanical Impurity Analyzer with 7-inch LCD Display 0.1℃ Resolution and 4-Channel PID Temperature Control

The SH101C automatic mechanical impurity content analyzer (with balance) is designed according to the requirements of the national standard GB/T511 "Determination of Mechanical Impurities in Petroleum Products and Additives (Weight Method)". It is suitable for determining the content of mechanical impurities in various light and heavy oils, lubricants, and additives in petroleum products.

Weigh a certain amount of sample and dissolve it in the solvent used. Filter it through a constant weight filter paper or microporous glass filter. Impurities left on the filter paper or microporous glass filter are called mechanical impurities.

Execution standard: GB/T 511-2010 "Petroleum and petroleum products and additives - Determination of mechanical impurities"

• Built-in oil-free maintenance-free vacuum pump, double solvent oil preheating system
• 7-inch TFT true color touch screen, 800×480 resolution
• Programme-controlled dual-channel pumping and filtration
• 4-channel PID temperature control for precise temperature management
• Built-in formula for automatic calculation of test results
• Automatic data query function with storage and printing capabilities
• Date and password setting function
• Standard micro printer with automatic measurement and thermal printing

• All instruments and materials are brand new and meet national quality standards
• Materials and main components meet specified technical requirements
• One-year overall quality assurance period (excluding normal wear and tear)
• Free maintenance for any instrument quality issues during warranty period
• Lifetime discounted supply of parts and lifetime maintenance
• Cost-based fees for maintenance and technical services after warranty expiration

1. Add mixed sample to beaker and weigh, then dilute with heated solvent according to GB/T 511-2010 Table 1 requirements
2. Place constant weight filter paper in glass funnel and filter hot sample solution
3. Wash residue with hot solvent oil and transfer to filter paper
4. For samples with high water content, let stand for 10-20 minutes before filtration
5. Use vacuum suction filtration for difficult-to-filter samples with funnel heating bath
6. Clean filter paper with solvent oil until no sample traces remain
7. For additives and lubricants, rinse with hot distilled water after solvent cleaning
8. Dry filter paper with sediment in weighing bottle at 105℃±2℃ for ≥45 minutes
9. Cool in dryer for 30 minutes and weigh accurately to 0.0002g
10. Repeat drying and weighing until consecutive weight difference ≤0.0004g

Where:
M1 - Mass of filter paper and weighing bottle (g)
M2 - Mass of filter paper and weighing bottle with mechanical impurities (g)
M3 - Mass of filter paper and weighing bottle before blank test filtration (g)
M4 - Mass of filter paper and weighing bottle after blank test filtration (g)
M - Mass of the sample (g)

All solvent preheating can be done using beaker heating bath cover (RT to 85℃). Weighing operations are automatically performed using the connected electronic balance. Click 'Calculate' after each weighing for automatic result calculation and storage.