Turbine oil is formulated with refined mineral oil or synthetic base oil, blended with functional additives including antioxidants, rust inhibitors and anti-wear agents. It is a special lubricant mainly used for lubrication, heat dissipation and hydraulic speed control systems of steam turbines, gas turbines, hydraulic turbines and combined-cycle units.
This test is to determine the oxidation stability of turbine oil and evaluate its resistance to oxidative degradation under high temperature and aerobic conditions. During long-term circulation inside turbine units, turbine oil will generate organic acids, sludge and sediments after oxidation, which leads to increased acid value, equipment corrosion and blocked oil passages, threatening the safe operation of the unit. The test helps estimate the service life of the oil and provides support for oil selection, in-service oil monitoring and oil change interval determination.
Test sample: Turbine oil
Test apparatus: SH0193C Automatic Rotating Pressure Vessel Tester, compliant with ASTM D2272.
![]()
The oxidation stability test of L‑TSA 46# turbine oil was performed in accordance with ASTM D2272 (test temperature: 150 °C, copper catalyst, water present, initial oxygen pressure: 620 kPa). The oxidation induction time was recorded as 132 min when the pressure decreased by 175 kPa from the maximum pressure.
The induction time of 132 min exceeds the general acceptance threshold for fresh turbine oil (≥100 min). It indicates that the oil has good oxidation stability and excellent thermal oxidation resistance. It will not rapidly form organic acids, sludge and sediments during long-term circulation in turbine units, and meets the lubrication and cooling requirements of turbine equipment. This result can be used for incoming inspection of new oil and condition monitoring of in-service oil.